|
Post by paranoiadragon on Aug 19, 2020 1:12:05 GMT
The hdmi is connected at both ends. I'll try a different cable when I have a chance to fool around with it. I hope it's not busted!
|
|
sarge
Punkic Cyborg
Posts: 104
Fave PCE Shooter: Soldier Blade
Fave PCE Game Overall: Dracula X: Rondo of Blood
Fave PCE RPG: Dungeon Explorer II
|
Post by sarge on Aug 19, 2020 1:56:18 GMT
Huh, I haven't run into that, but then again, all the mini consoles I have outside of the TG-16 Mini are modded. Hakchi might be doing something to ensure they boot properly even without an HDMI signal.
|
|
|
Post by paranoiadragon on Aug 21, 2020 19:28:32 GMT
I got it working. I unplugged the AC adapter from the back of the Turbo and then plugged it back in. I have no idea why that work but it did.
|
|
sarge
Punkic Cyborg
Posts: 104
Fave PCE Shooter: Soldier Blade
Fave PCE Game Overall: Dracula X: Rondo of Blood
Fave PCE RPG: Dungeon Explorer II
|
Post by sarge on Aug 23, 2020 14:48:05 GMT
Huh, weird. Glad it's working, though!
|
|
|
Post by imparanoic on Aug 27, 2020 2:05:43 GMT
any one uses the hori ps4 controller wired mini controller (unofficially compatible) or hori switch wired controller on their pc engine mini, as the official pc engine mini controllers are rather expensive, need a cheaper controller for 2 players, the hori switch wired controller which i have the d pad is spongey and isn't good, the d pad is actually detachable and the buttons beneath can be used, but it's a compromised solution which don't work that well.
also any one used a usb hub for 5 players as the official hori pc engine multi tap is quite expensive
|
|
|
Post by nectarsis on Aug 27, 2020 15:18:54 GMT
any one uses the hori ps4 controller wired mini controller (unofficially compatible) or hori switch wired controller on their pc engine mini, as the official pc engine mini controllers are rather expensive, need a cheaper controller for 2 players, the hori switch wired controller which i have the d pad is spongey and isn't good, the d pad is actually detachable and the buttons beneath can be used, but it's a compromised solution which don't work that well. also any one used a usb hub for 5 players as the official hori pc engine multi tap is quite expensive not sure why people keep posting "unofficially compatible"...seen it a few places...it either works or it doesn't
|
|
|
Post by spenoza on Aug 27, 2020 15:25:50 GMT
I think that's helpful information to have. It doesn't bother me at all.
|
|
|
Post by imparanoic on Aug 28, 2020 3:37:59 GMT
any one uses the hori ps4 controller wired mini controller (unofficially compatible) or hori switch wired controller on their pc engine mini, as the official pc engine mini controllers are rather expensive, need a cheaper controller for 2 players, the hori switch wired controller which i have the d pad is spongey and isn't good, the d pad is actually detachable and the buttons beneath can be used, but it's a compromised solution which don't work that well. also any one used a usb hub for 5 players as the official hori pc engine multi tap is quite expensive not sure why people keep posting "unofficially compatible"...seen it a few places...it either works or it doesn't If it's officially support then hori will advert it if not official then it works but it not intended
|
|
|
Post by gredler on Aug 28, 2020 16:54:20 GMT
Can't believe this thing is not hacked yet. Apparently a team has a working hack, but nothing officially released. I am so curious to have this emulator broken open for other games to see how everything else behaves on it.
|
|
|
Post by Black_Tiger on Aug 28, 2020 19:12:36 GMT
Anyone know if the Near Arcade games have been extracted? It's difficult to find search results since they're already "arcade" games.
|
|
|
Post by SignOfZeta on Aug 28, 2020 21:25:49 GMT
any one uses the hori ps4 controller wired mini controller (unofficially compatible) or hori switch wired controller on their pc engine mini, as the official pc engine mini controllers are rather expensive, need a cheaper controller for 2 players, the hori switch wired controller which i have the d pad is spongey and isn't good, the d pad is actually detachable and the buttons beneath can be used, but it's a compromised solution which don't work that well. also any one used a usb hub for 5 players as the official hori pc engine multi tap is quite expensive I tried a regular USB hub on mine and it didn’t work. It may be a fluke or you may actually have to buy their tap, which is pretty gross. Luckily the thing has two USB ports built in so at least it can play Bomberman 94 in story mode co-op. I got the 8Bit Do wireless pad because it was the cheaper choice. It works on Switch, PCE Mini, Mac OS, and who knows what else. The actual PCE Mini pad doesn’t though...so I have two pads with USB connectors on them that will never be useful for anything except the PCE Mini. Thank goodness for hackers. I hope someone PSPGoes this thing soon.
|
|
|
Post by imparanoic on Aug 31, 2020 1:33:50 GMT
i am using the hori ps4 controller wired mini controller on pc engine mini and it's awesome, better ergonomics and better d pad, i have also borrow hori real arcade pro joystick and that's really awesome
|
|
keithcourage
Punkic Cyborg
https://www.facebook.com/turbografxfan/
Posts: 231
|
Post by keithcourage on Sept 3, 2020 2:35:38 GMT
Turbografx Mini is back up for sale in the US. www.amazon.com/gp/offer-listing/B07QD9GQ9JI was wondering. Has anyone found an arcade stick that will work with the mini systems? I want to get a Turbografx mini or coregrafx mini but if I can't use an arcade stick of any sort then there is no point for me since that is my controller of choice.
|
|
|
Post by tron on Sept 3, 2020 5:36:42 GMT
Turbografx Mini is back up for sale in the US. www.amazon.com/gp/offer-listing/B07QD9GQ9JI was wondering. Has anyone found an arcade stick that will work with the mini systems? I want to get a Turbografx mini or coregrafx mini but if I can't use an arcade stick of any sort then there is no point for me since that is my controller of choice. I don't know about the sale listing all i see are for third parties and the tg16 mini is being priced gouged.Man i'm glad i originally got one through a preorder before this scalping bs happen.It's happen with other minis as well like with the snes classic sellers,want $100.00+ second hand.I never payed for those prices either since i got one refurbished instead from nintendo at it's retail price.
|
|
keithcourage
Punkic Cyborg
https://www.facebook.com/turbografxfan/
Posts: 231
|
Post by keithcourage on Sept 3, 2020 6:15:02 GMT
Crap it sold out already. A few youtubers posted the link as well. So the word got out there really fast.
It was $99.99 earlier in the day and at the time I posted here for a restock on the 26th of sept. So a month pre order.
With as fast as these keep selling out, I'd assume they will do another pre-order later down the line.
|
|