|
Post by nawash083 on Dec 22, 2022 20:32:30 GMT
Good evening everybody, does anybody have the pc engine duo block diagrams please? I've totaly recap my duo but the led doesn't light on. I've 4.95v at both legs (A - K). I think i've a shortcut Somewhere but i don't have the video cable to check if the pc engine goes on or not. The Lens moves just a little bit but the cd doesn't turn. Maybe the Lens is out of service. Would like to check all the signals i Can, but need the schematics to do this correctly.
Hope somebody Can help. Thanks.
Wish you all merry Christmas.
|
|
keithcourage
Punkic Cyborg
 
https://www.facebook.com/turbografxfan/
Posts: 220
|
Post by keithcourage on Dec 29, 2022 1:40:51 GMT
The LED only comes on when hitting run on the controller to start a CD game. It's not a power light.
You could temporarily connect a spare RCA cable to the AV jack by just soldering to the pins on the AV port to test. It would be good to know what the CD bios screen says or does when the system is powered on. You might not even be getting the CD bios screen to show up when the system is powered on.
|
|