|
|
Post by digipiggy on Dec 19, 2019 5:04:30 GMT
This was brought to my attention on FB by none other than Tats 新商品発表🌟 ◆PCE用 『ポータブルモニターLCD』 ＜2020年4月上旬新発売✨＞ ⇒PCエンジン用液晶モニター登場！ 2020年春、最強のオーパーツが降臨！！「4.3インチ液晶パネル」を採用し、音量や明るさ調節、画面比率「4:3／16:9」切替え機能も搭載した液晶モニターです！ ※HP内、商品ページ作成中 Coming in April 2020 16:9 or 4:3 screen ratios volume and brightness controls will run from external power battery and play games on the go HDMI output     |
|
exodus
Punkic Cyborg
Posts: 167
|
Post by exodus on Dec 19, 2019 19:18:49 GMT
Ah! turn it into an LT basically!
|
|
|
|
Post by Black_Tiger on Dec 19, 2019 19:53:25 GMT
Too bad it doesn't wrap across the top of the PC Engine and includes a built-in controller like the LT.
|
|
|
|
Post by spenoza on Dec 19, 2019 20:15:53 GMT
And such a small screen for something that size.
|
|
|
|
Post by _jash on Dec 19, 2019 20:58:04 GMT
HDMI out, wowzers, I wonder what that will look like on an LED/LCD! Pretty cool stuff, thanks for sharing!
|
|
|
|
Post by Black_Tiger on Dec 20, 2019 5:27:25 GMT
And such a small screen for something that size. In the mockups the viewable area looks roughly the same size as a HuCard. |
|
|
|
Post by tron on Dec 22, 2019 7:28:26 GMT
Neat but this is third party i guess a wait and see if the quality is good at all.Columbus Circle business so far has been doing reprints for md and sfc games.
|
|
|
|
Post by goldenwheels on Dec 22, 2019 14:54:34 GMT
Jeez...give me a bigger screen and I'd find it hard to resist. Right now....not so hard.
|
|
exodus
Punkic Cyborg
Posts: 167
|
Post by exodus on Dec 23, 2019 21:39:13 GMT
Neat but this is third party i guess a wait and see if the quality is good at all.Columbus Circle business so far has been doing reprints for md and sfc games. It couldn't be anything but third party! NEC isn't exactly making very many pc engine peripherals these days. My big issue is that it's a 16:9 screen - I know 4:3 screens are pricey now, but I wish they'd opted for at least the 5" LCD and masked it off to 4:3 so it'd look proper. |
|
keithcourage
Punkic Cyborg
https://www.facebook.com/turbografxfan/
Posts: 232
|
Post by keithcourage on Dec 24, 2019 2:07:52 GMT
They could have gotten a larger 16:9 screen because they are cheaper, set it to 4:3, and then put a 4:3 border over it so no one would even know it is widescreen. This is how I do screen replacements for Pc engine LTs. get a 5" widescreen and set it for 4:3. Looks great.
|
|
exodus
Punkic Cyborg
Posts: 167
|
Post by exodus on Dec 24, 2019 20:24:16 GMT
agreed! that's what I just said :3
|
|
keithcourage
Punkic Cyborg
https://www.facebook.com/turbografxfan/
Posts: 232
|
Post by keithcourage on Jan 6, 2020 22:35:53 GMT
Hah, so you did. Not sure why I didn't see it when I was posting. Great minds think alike.
|
|
|
|
Post by imparanoic on Jan 7, 2020 2:33:19 GMT
extra bonus, hdmi to TV output!
|
|
|
|
Post by tron on Jan 9, 2020 6:24:53 GMT
Neat but this is third party i guess a wait and see if the quality is good at all.Columbus Circle business so far has been doing reprints for md and sfc games. It couldn't be anything but third party! NEC isn't exactly making very many pc engine peripherals these days. My big issue is that it's a 16:9 screen - I know 4:3 screens are pricey now, but I wish they'd opted for at least the 5" LCD and masked it off to 4:3 so it'd look proper. I second that. |
|
|
|
Post by purple1308 on Jan 13, 2020 3:49:14 GMT
This is cool concept through and the nice bonus of hdmi so it isnt all bad
|
|
