|
Post by soop on Feb 24, 2019 17:22:06 GMT
Ahh, that's really helpful. It might be a good opportunity to learn how to use my oscilloscope too.
I did connect the c-sync from the Engine to the h-sync of the board, but not directly to the chip in the datasheet. I connected it to the VGA input, there's a connector
|
|
|
Post by ClodBuster on Feb 24, 2019 17:33:53 GMT
There might or might not be some additonal components between the VGA connector and the inputs of the chip. I think there'll be trial and error involved, so don't give up too early.
|
|
|
Post by soop on Feb 28, 2019 15:31:25 GMT
I bought a sync stripper, that might do the trick.
|
|