nullity
Gun-headed
Posts: 50
Fave PCE Shooter: Silent Debuggers
Fave PCE Platformer: Silent Debuggers
Fave PCE Game Overall: Mario
Fave PCE RPG: Silent Debuggers
|
Post by nullity on Jun 17, 2018 16:51:40 GMT
Does anyone have a link to a replacement AV cable for the Duo? Mine got tripped over and the cables were ripped out of the connectors.
If I recall, monoprice sells them but I don't remember which one specifically.
|
|
keithcourage
Punkic Cyborg
https://www.facebook.com/turbografxfan/
Posts: 230
|
Post by keithcourage on Jun 19, 2018 3:32:20 GMT
I have some new good quality ones. The only downfall is the color coding for the RCA plugs is a little different. Black is the color used for Video. White and red are for audio as usual. So basically just use Black instead of Yellow for the video and all is good. How does $8 shipped sound? Just send me a PM if you want one.
|
|
|
Post by ClodBuster on Jun 19, 2018 4:17:46 GMT
Keith!!! Welcome!
|
|
nullity
Gun-headed
Posts: 50
Fave PCE Shooter: Silent Debuggers
Fave PCE Platformer: Silent Debuggers
Fave PCE Game Overall: Mario
Fave PCE RPG: Silent Debuggers
|
Post by nullity on Jun 22, 2018 13:43:39 GMT
Thank you, Mr. Courage!
|
|
squeeb
Deep Blooper
Posts: 5
Fave PCE Shooter: Star Parodier
Fave PCE Platformer: Rondo of Blood
|
Post by squeeb on Aug 10, 2018 15:57:14 GMT
This is the one I picked up (my system did not include a cable) and it has worked great so far!
|
|
czroe
Deep Blooper
Posts: 45
|
Post by czroe on Sept 8, 2020 0:43:01 GMT
Too bad most towns don't have a shop like Radio Shack anymore. It used to be you'd just grab a DIN-5 connector for a couple bucks and chop up a $0.50 stereo composite cable from a thrift shop. If you have to pay shipping and wait you might as well get pre-made cables. Because I didn't need stereo for my RAU-30 ROM² Adapter and UperGrafx UGX-02 setups, I just use a Genesis 1/Master System/Neo Geo cable and get audio from the IFU or UGX headphone jack (when I'm not using HDMI audio). I recently used a Gen1 cable for testing a Duo since I was connecting to a Dell monitor sound bar which used the Duo's headphone jack for audio. Other times I wanted a true mono cable for connecting to a mono TV and made one from Gen1 cables by bridging two pins inside the cable to get both audio channels. The volume was turned down for the video but I have mono AV to the Trinitron CRT (mono-only) and stereo HDMI to the Bravia XBR LCD in this old video: You can usually disassemble the DIN connector to make the jump inside but the $3 Gen1 composite cables from Console5 were molded. DIN pins are WAY too big for my wire-wrapping tool so I took a multimeter probe cap and poked a tiny hole in it to create a make-shift wire-wrapping tool for the DIN: imgur.com/a/fvByupNIt worked. Granted, you want square pins for a good wire-wrap connection but this $2.20 cable doesn't need to last forever or anything and I bought a bunch... hence being $2.20 instead of $3. Heck, maybe I can get down in there with a soldering iron to make a lasting connection.
|
|
czroe
Deep Blooper
Posts: 45
|
Post by czroe on Dec 24, 2020 18:20:43 GMT
I should add that for an original Duo with a headphone jack, a Genesis 1/Master System DIN5 AV cable works exactly the same for stereo as it does with Genesis and Neo Geo AES. In all cases you grab video from the cable and stereo from the headphone jack.
|
|